Welcome to our Precision Farming Department!
Come in and let Mike Hockin, our GPS technician, show you all of the latest developments with Precision Farming.




Precision Farming
Come in and let Mike demonstrate the various products we have to offer! With his knowledge he can help to make your decision easier for you.




Our GPS Products

EZ-Guide Plus EZ-Guide 250 EZ-Guide 500 EZ-Steer Field Manager/Autopilot EZ-Boom 2010



EZ-Guide Plus



EZ-Guide Plus User Manual

EZ-Guide Plus 4.11 Firmware

Back To Top


EZ-Guide 250



EZ-Guide 250 User Manual

Back To Top


EZ-Guide 500



The EZ-guide 500 lightbar system features a large 7-inch LCD display and has a built-in lightbar with a guidance LED array that is highly visible even in direct sun. The EZ-Guide 500 offers advanced but easy-to-use guidance patterns, as well as real-time “where applied” coverage mapping. The plan and perspective views allow the users to see on screen, in color and real-time, the area they have covered in the field.

With its high precision dual-frequency L1/L2 Global Positioning System (GPS) receiver, the EZ-Guide 500 system offers users a variety of accuracy options without purchasing an external GPS receiver. Users can choose: 6-8 inch pass to pass accuracy using free Wide Area Augmentation System (WAAS) signals; 3-5 inch accuracy with OmniSTAR XP/HP subscription service; or 1-inch year-to-year repeatability using RTK corrections, based on crop and operation needs.

The EZ-Guide 500 system is designed to provide GPS positioning and graphic display for use with Trimble’s assisted steering, automated guidance and spray rate control solutions:

The AgGPS EZ-Steer assisted steering system can be connected to the EZ-Guide 500 system in approximately 30 minutes and can be used on hundreds of vehicle models.

The EZ-Guide 500 can also drive the Trimble AgGPS Autopilot automated steering system, which offers multiple accuracy options, including +/-1 inch repeatable accuracy



EZ-Guide 500 User Manual

EZ-Guide 500 3.0 Firmware

EZ-Guide 500 Demo (Flash Required)

Back To Top


EZ-Steer

The unique EZ-Steer® assisted steering system turns the steering wheel for you by combining a friction wheel and motor with GPS guidance from the EZ-Guide® Plus lightbar. Now, while the EZ-Steer system keeps you +/- 6-8 inches on line in any terrain, you can focus on many different tasks, such as spray or planter performance. Basically, the EZ-Steer system gives you time to ponder the fuel and input savings of straighter rows -while reducing driver fatigue.



Trimble's exclusive T2™ terrain compensation technology gives the EZ-Steer user +/- 6-8 inch pass-to-pass accuracy and smooth hands-free driving on rolling, sloping or even rough terrain such as ditches waterways and terraces. This optional feature uses two accelerometers and two gyroscopes to compensate for roll and yaw. Information from these sensors, located in the steering controller, is used at 10 times per second to compensate the GPS position for sloping and rough terrain.


SCM firmware 3.00.01 (for use w/EZ-Guide Plus)

SCM firmware 4.01.00 (for use w/EZ-Guide 500)

EZ-Steer Manual

Back To Top


Field Manager/Autopilot



The Trimble AgGPS FieldManager display, which consists of software and hardware for use with an AgGPS Autopilot automated steering system, provides easy-to-use advanced field management. The software runs on a 26.4cm (10.4”) touch-sensitive, color LCD screen.

For several years, the AgGPS Autopilot system has been Trimble’s most accurate system for agricultural guidance. Now, with the FieldManager display, that same accuracy can be utilized with a touch-screen interface to provide easy, precise, and reliable steering.

The Autopilot system connects to your vehicle’s power steering system, then using the in-cab display you can select from straight, curve, pivot, and headland field patterns and view the system operating. Once the autopilot system lines up the vehicle at the beginning of a row, the automated steering guides the vehicle smoothly while the display provides visual feedback on your course.

T3 terrain compensation technology ensures the Autopilot system works on slopes and rough terrain. Inertial measurement technology corrects for roll, pitch and yaw to insure you are where you want to be, even in the roughest ground conditions.



Field Manager Display User Manual

Field Manager 5.1 Firmware

Field Manager Display Demo (Flash Required)

Back To Top


EZ-Boom 2010



The AgGPS Ez-Boom 2010 boom switching and spray rate control system from Trimble is designed to help growers cut input costs, ensure the accuracy of spray applications, and reduce stress during peak fieldwork periods.

It works with the Ez-Guide Plus lightbar guidance system, the Ez-Guide 500 lightbar guidance system, the Ez-Steer assisted steering system and the Autopilot automated steering system. Ez-Boom adds value to these systems by:

- Automatically controlling up to 10 separate automated boom sections, avoiding overspray and untreated gaps on angled end rows, terraces, waterways and other no-spray areas.

- Delivering precise rate control field, reducing the application cost of the chemical and maximizing the performance of the application.

- Simplifying installation and reducing equipment costs for spray systems.

- Producing an exact real-time summary map that shows the sprayed area.



EZ-Boom Manual

EZ-Boom Firmware v1.1

Back To Top




























Box 2110
Neepawa , Manitoba
R0J 1H0

e-mail:
smayor@mts.net
Phone: (204) 476-3344
Fax: (204) 476-3625
Toll Free: 1-800-548-7770



Copyright ©2008 Mayor Equipment Ltd.
Last updated: 6/3/2008
Site design and hosting by IRON Solutions LLC